Thermoforming Machines

Proven technologies, complete solution, rich experience, fully-automatic, semi-automatic, three/four stations; Produce food container, fruit packaging boxes, egg trays, seedling trays, electronic trays, food trays, clamshell, etc.

Tz-7695 negative pressure thermoforming machine

TZ-7265 Fully Automatic Positive And Negative Pressure Thermoforming Machines ( Three/four Stations )

Forming size (Max.): 720x650mm, Fully automatic, Servo drive completely, adopt plastic sheet vacuum forming technology, three stations: forming, cutting, stacking; four stations: forming, hole punching, cutting, stacking;

1, Lead Time:1-2 months after deposit confirmed

2, Price Term: FOB,EXW,CFN,CIF,etc.

3,Payments: T/T,Visa,Paypal,etc.

Play Video about TZ-7265 normal forming area thermoforming machine

TZ-7265 Thermoforming Machine Features:

Adopt plastic sheet thermoforming technology, it is an integrated of machines, electricity, and gas. PLC control system, Human machine inferface. Both concase and convex molds can be formed’ Three stations: forming, cutting, stacking; four stations: forming, hole pouching , cutting,stacking. Fully automatic, can produce product automatically. Need less labor, convenient to operate, improve production efficiency. The workshop is clean, high degree of automation. It’s a flow-type production line which is specialized in thermoforming and pouching products.

Scope Of Application:

Suitable for forming of 0.15-2.0 mm thermoplastic materials, such as PS HIPS PET, PP, KPS, GPET, PLA, and so on. Can produce high transparent, high stretching, round, square, irregular, up and down stretching and flanging products. Such as plastic food box, electronic trays, food packaging boxes, medical packaging boxes, finished tool packaging, seedling trays, disposable bowls, plates, and other plastic products.

Food Packaging Box

Fruit Packaging Box

Clamshell

Egg trays

Electronic Trays

Seedling Trays

Meat Packaging Box

Food Trays

Technical Parameters Of TZ-7265 Thermoforming Machine:

	Model	TZ-7265 (Nornal Forming Area）
1	Forming Method	Positive and negative pressure forming
2	Forming Area	Formed Sheet Length: 340-650mm,formed sheet width: 380-760mm
3	Forming Depth (Max.)	110mm
4	Sheet Thickness	PS:0.16-2.0mm PP:0.16-1.6mm PET/PVC:0.16-1.2mm
5	Suitable Materials	PP,PS,PET,PVC,BOPS,PLA,etc.
6	Cutting thickness	0.16-2.0mm(hot die cutting if more than 1mm )
7	Total Power	Installed capacity 120KW (maximum power)
8	Forming Speed	40times/min
9	Upper Mold Forming Station	4.5kw Huichuan Servo Drive
10	Lower Mold Forming Station	4.5kw Huichuan Servo Drive
11	Upper Punching Station	5.5kw Huichuan Servo Drive
12	Lower Punching Statioin	4.5kw Huichuan Servo Drive
13	Strech	3.0kw Huichuan Servo Drive
14	Stacking	3.0kw Huichuan Servo Drive * 2
15	Touch Screen	German Siemens 12.5 inch color touch screen
16	Solenoid Valve,water and oil barrier	Japan “CKD”
17	Heating Brick	Upper furnace:72pcs 650w heating brick;lower furnace:48pcs 650w heating brick;heating area length: 1500mm (three-section heating areas)
18	Equipment main electrical conpoments:German Siemens, Japam Fuji
19	Cooling method: One water chiller, 5HP (compressor “Panasonic” or “Copeland”)
20	Negative pressure generation method: one 160㎡ vacuum pump.
21	Adopt PLC programmable control and human-machine interface German Siemens 12.5-inch color touch screen operating system, this system can greatly enhance the stability and response speed of each action process
22	Adopt 4.5kw servo motor to convey,accurate,stable and easy to operate
23	have 1000 memory units,can store production dates,convenient to find the old dates to produce.
24	Silicone oil spraying system for feeding
25	Partial cylinders: Yadeke, Yongyi
26	Air switch, contactor, travel switch: Japan “Fuji” Relay: France “Schneider”
27	Main frame: Steel plate, angle iron, pig iron, stainless steel,made in China
28	Rail: aluminum mold-extruded rail,surface oxidation treatment
29	Stacking method: take the product from mold and stab the product.
30	Production line: Fully automatic productin line
31	Weight which the winder can bear:500kgs
32	Max.Machine Power:120Kw, actual consumption power:50-60Kw,Power Supply:AC 380V,50Hz, Three-phase, Four-wire ; One-to-one temperature system, save more energy
33	Equipment size: Length: about 10.5 m,Width: 2.15 m,hength: 2.8 m,weight: about 10.5 tons

Production Process:

TZ-7265 Thermoforming Machine Details:

The feeding system uses a motorized lift capable of supporting 500 kg. The material is delivered using rubber rollers, with two material rods for sheet replacement.

The plastic sheet was sent by the sharp tooth, which was driven by the servo-motor. The width of the chain can be adjusted. Aluminum extruded chain truck, silicon steel.

Furnace temperature system adops PLC which can control the ceramic heating parts one to one. convenient to adjust the temperature, easy to operate, quick to heat up, low energy consumption.

The installation of the mold is easy and safe, it can short the setting time of the mold. Using the mold change bracket can improve the efficiency of changing mold.

Siemens 10.1 color touch screen, LC integrated module design. Have button operations, can set and modify the process parameters. Easy and convenient to operate and maintain.

Driven by servo motor to close the mold, with cylinder clamping frame and servo stretching function at the same time.

Has an automatic mold locking system, which can fix the mold after the installation and adjustment. Don’t need screws to fix the mold and can short the setting time of the mold. It can improve efficiency. And the cutter has heat functions.

Stacking station has multi-functional stacking modes, normally choose automatic up and down stacking manipulator and manipulator (take products from cutting mold out and then stack on the conveyor belt).

Thermoforming Machines

TZ-7265 Fully Automatic Positive And Negative Pressure Thermoforming Machines ( Three/four Stations )

TZ-7265 Thermoforming Machine Features: