Mesin termoforming vakum otomatis kecil SWT-720A dengan komponen yang diberi label

Mesin Thermoforming Vakum Otomatis Kecil SWT-720A

Q: How much floor space and power does the SWT-720A need?

About 3,000 x 2,200 mm of floor space and 21 kW installed power with roughly 12 kW actual draw, on 380 V three-phase 50 Hz. Other voltages can be configured for your country.

Mesin thermoforming vakum otomatis penuh berukuran kecil SWT-720A mampu membentuk baki berukuran 720 × 610 mm dengan kedalaman hingga 120 mm pada kecepatan 60–180 siklus per jam, serta dapat mengolah bahan PET, PP, PS, PVC, dan PLA dengan daya terpasang sebesar 21 kW.

1, Waktu Pimpin: 1-2 bulan setelah setoran dikonfirmasi

2, Istilah Harga: FOB, EXW, CFN, CIF, dll.

3, Pembayaran: T / T, Visa, Paypal, dll.

A small full-auto vacuum thermoforming machine turns roll stock into finished trays, boxes and blisters in one inline cycle: feeding, heating, vacuum forming, dual cooling and robotic unloading. The SWT-720A is built for small and mid-size packaging producers who need full automation without a full-size line — one operator, no manual handling between stages.

Spesifikasi Utama

Model	SWT-720A
Area pembentukan	720 × 610 mm (mould plate 400–610 mm, electrically adjustable)
Membentuk kedalaman	Max. 120 mm
Keluaran	60–180 cycles/hour
Bahan	PET, PP, PS, PVC, PLA and biodegradable sheet
Catu daya	380 V / 3-phase / 50 Hz (three-phase four-wire)
Daya terpasang	21 kW (actual draw ≈ 12 kW)
Control	PLC + 10-inch touch screen, per-zone temperature control, multi-recipe memory
Pemanasan	30 infrared ceramic bricks, independently controlled, ≈30% less electricity
Machine size	≈ 3,000 × 2,200 × 2,100 mm, ≈ 750 kg
Line supplied	Feeding rack + main machine + robotic unloader + stacking box

Aplikasi

Fast-food boxes, fruit trays, mooncake inner trays, egg trays, seedling trays, and blister packs for batteries and electronics.

Engineering Features That Cut Scrap and Power Use

Enclosed insulated furnace with thermal cut-off and emergency stop — safe for a small workshop.
1.2 mm alloy aluminium mould plate with stainless edge banding: it will not deform under heat.
Cold air + water spray dual cooling for clean demoulding, no distortion and longer mould life.
Per-brick heating control cuts power consumption by about 30%.
Serviceable components — Omron relays, CHNT contactors, joint-venture YXD valves, 100 m³ vacuum unit — parts you can source locally.
Recipe memory: a repeat order becomes a one-touch setup.

PERTANYAAN YANG SERING DIAJUKAN

What is a small full-auto vacuum thermoforming machine used for?

It forms plastic sheet into trays, boxes and blisters automatically — feeding, heating, vacuum forming, cooling and stacking run inline, so one operator can run the whole line.

Which materials can the SWT-720A run?

PET, PP, PS, PVC, PLA and biodegradable sheet, in roll form. Thickness is set by product design.

How much floor space and power does it need?

About 3,000 × 2,200 mm of floor space, 21 kW installed power with roughly 12 kW actual draw, on 380 V three-phase 50 Hz. Other voltages can be configured for your country.

How fast is a mould change?

Stored recipes recall heating zones, mould height and cycle settings, so a repeat job is a one-touch setup measured in minutes rather than hours.

Get a Quotation

At 750 kg and 3 m long, one SWT-720A fits a standard workshop. Send your tray drawing and target output — we will return a mould layout and a full quotation with CIF pricing to your port.