Pequeña máquina de termoformado al vacío totalmente automática SWT-720A

Q: How much floor space and power does the SWT-720A need?

About 3,000 x 2,200 mm of floor space and 21 kW installed power with roughly 12 kW actual draw, on 380 V three-phase 50 Hz. Other voltages can be configured for your country.

La pequeña máquina de termoformado al vacío totalmente automática SWT-720A forma bandejas de 720 × 610 mm con una profundidad de hasta 120 mm a una velocidad de 60 a 180 ciclos por hora, y procesa PET, PP, PS, PVC y PLA con una potencia instalada de 21 kW.

1, Plazo de entrega: 1-2 meses tras la confirmación del depósito

2, Término del precio: FOB, EXW, CFN, CIF, etc.

3,Pagos: T/T,Visa,Paypal,etc.

A small full-auto vacuum thermoforming machine turns roll stock into finished trays, boxes and blisters in one inline cycle: feeding, heating, vacuum forming, dual cooling and robotic unloading. The SWT-720A is built for small and mid-size packaging producers who need full automation without a full-size line — one operator, no manual handling between stages.

Características técnicas principales

Modelo	SWT-720A
Área de formación	720 × 610 mm (mould plate 400–610 mm, electrically adjustable)
Profundidad de moldeo	Max. 120 mm
Salida	60–180 cycles/hour
Materiales	PET, PP, PS, PVC, PLA and biodegradable sheet
Alimentación	380 V / 3-phase / 50 Hz (three-phase four-wire)
Potencia instalada	21 kW (actual draw ≈ 12 kW)
Control	PLC + 10-inch touch screen, per-zone temperature control, multi-recipe memory
Calefacción	30 infrared ceramic bricks, independently controlled, ≈30% less electricity
Machine size	≈ 3,000 × 2,200 × 2,100 mm, ≈ 750 kg
Line supplied	Feeding rack + main machine + robotic unloader + stacking box

Aplicaciones

Fast-food boxes, fruit trays, mooncake inner trays, egg trays, seedling trays, and blister packs for batteries and electronics.

Engineering Features That Cut Scrap and Power Use

Enclosed insulated furnace with thermal cut-off and emergency stop — safe for a small workshop.
1.2 mm alloy aluminium mould plate with stainless edge banding: it will not deform under heat.
Cold air + water spray dual cooling for clean demoulding, no distortion and longer mould life.
Per-brick heating control cuts power consumption by about 30%.
Serviceable components — Omron relays, CHNT contactors, joint-venture YXD valves, 100 m³ vacuum unit — parts you can source locally.
Recipe memory: a repeat order becomes a one-touch setup.

PREGUNTAS FRECUENTES

What is a small full-auto vacuum thermoforming machine used for?

It forms plastic sheet into trays, boxes and blisters automatically — feeding, heating, vacuum forming, cooling and stacking run inline, so one operator can run the whole line.

Which materials can the SWT-720A run?

PET, PP, PS, PVC, PLA and biodegradable sheet, in roll form. Thickness is set by product design.

How much floor space and power does it need?

About 3,000 × 2,200 mm of floor space, 21 kW installed power with roughly 12 kW actual draw, on 380 V three-phase 50 Hz. Other voltages can be configured for your country.

How fast is a mould change?

Stored recipes recall heating zones, mould height and cycle settings, so a repeat job is a one-touch setup measured in minutes rather than hours.

Get a Quotation

At 750 kg and 3 m long, one SWT-720A fits a standard workshop. Send your tray drawing and target output — we will return a mould layout and a full quotation with CIF pricing to your port.